17 de Janeiro de 2015, 9:06 - 0sem comentários ainda| Ninguém está seguindo este artigo ainda.
Proprietary stuff, what a bad choice! RouterOS has many features and SXT has pretty powerful hardware, but with level 3 licence you can't even work as a AP! Shame on you Mikrotik!
Start by installing some tools on your machine to setup a TFTP and DHCP server:
sudo apt-get install isc-dhcp-server atftpd wireshark
- Version 18 openwrt made a significant simplifying change to the RouterBoard installation procedure: openwrt now installs and upgrades directly from the LuCI web interface of openwrt. This means the procedure to install openwrt on a Mikrotik RouterBoard is now just two steps: Step 1.
- See Common Procedures for Mikrotik Router Boards for a general discussion of the procedures to install OpenWrt on Mikrotik RouterBoards. The Common Procedures apply directly to the RB450G and are generally kept more up-to-date than these product-specific wiki pages, so it is a good idea to initially refer to the Common Procedures.
- And set a password. On the linux PC, you can now copy the images onto the Routerboard: scp bin/ar71xx/openwrt-ar71xx-nand-rootfs.tar.gz bin/ar71xx/openwrt-ar71xx-nand-vmlinux.elf [email protected]:/tmp Flash the images onto the Routerboard Flashing the images is simple, once you have them on the Routerboard. First, the kernel.
- Quick guide for installing OpenWrt on a Mikrotik mAP lite. Try ethernet once then NAND System → Routerboard → Settings → Boot protocol: DHCP System.
Openwrt-ar71xx-mikrotik-vmlinux-lzma.elf [email protected]:/tmp In our case both files were located in /openwrt os, so the instruction was executed as.
Write to /etc/default/atftpd
And to /etc/dhcp/dhcpd.conf
Then
The manual is at http://i.mt.lv/routerboard/files/SXTug.pdf. There you have a Button Index where you can see that if you hold the Reset button for more than 20 seconds (10 seconds after blinking stops) then Etherboot will be triggered.
Do this while watching Wireshark and /var/log/syslog
If things has gone correctly, you should be able to access the Luci web interface at http://192.168.1.1
Now you'll need a local webserver for wget2nand to download the kernel and the rootfs:
Now flash!
If you want to flash multiple devices, setup one with the packages (I've installed rsync ppp-mod-pptp luci-app-qos) and configuration you want and package a new rootfs (replace IP of the template device): Dell dmi tool set.
Routerboard 750 Quick Setup Guide
Inspired by http://www.ericconrad.com/2012/05/installing-openwrt-on-routerboard-750gl.html and https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750
Installing OpenWrt On A Microtik Routerboard RB433 - Ixs ..
Bráulio Bhavamitra